The filters are designed for highly efficient purification of air and gases in production facilities. They effectively prevent the release of radioactive and toxic aerosols of various origins into the environment.
The filter is made of fiberglass, is heat-resistant, two-section. Nominal capacity - 3500 m³/h. FAS-V-3500 has two modifications: FAS-V-3500-DO4, FAS-V-3500-MO4.
Aerosol sectional high-efficiency filter FAS-VE-2850 B
The aerosol filter consists of two filter sections: a coarse filter and a high-efficiency filter. The filters capture particles as small as 0.1 microns, including beryllium. The nominal capacity is 2850 m³/h.
They are designed to prevent the release of radioactive contaminants into the air. This issue remains a major concern in the environmental and radiation safety of nuclear power plants, industrial facilities, and medical establishments. Aerosol-iodine filters provide a combined method of air purification from aerosols of any origin (including radioactive ones) and gaseous molecular compounds of iodine and its organic derivatives. Adsorber filters are specifically designed to reduce radioactive emissions into the atmosphere through the chromatographic sorption of inert radioactive gases and the removal of radioactive iodine compounds at nuclear power plants and other nuclear facilities.
Aerosol sectional high-efficiency filter with iodine purification section FAS-V-3000-IS
Provides cleaning from radioactive aerosols and radioactive iodine. Nominal capacity - 3000 m³/h. FAS-V-3000-IS has two modifications: FAS-V-3000-IS(M), FAS-V-3000-IS(D).
Aerosol sectional high-efficiency filter with iodine purification section FAS-V-3500-IS
For use in exhaust ventilation systems of various industrial enterprises, including radio-chemical and nuclear power plants. The nominal air flow rate is at least 3500 m³/h.
Aerosol sectional high-efficiency filter with iodine purification section FAS-V-2000-IS
For use in exhaust ventilation systems of various industrial enterprises, including radio-chemical and nuclear power plants. Nominal air flow rate of at least 2000 m³/h
Aerosol sectional high-efficiency filter with iodine purification section FAS-V-500-IS
For use in exhaust ventilation systems of various industrial enterprises, including radio-chemical and nuclear power plants. The nominal air flow rate is at least 500 m³/h.
It is designed to purify the air (gas) of production facilities from iodine and its compounds. The nominal air capacity of the adsorber filter is 1,500 m³/h.
The filter of the waste-free technology system is designed to purify the gas (air) released into the atmosphere from radioactive aerosols and vaporous iodine compounds during gas discharge in a waste-free technology system.
The adsorber filter is designed to reduce radioactive emissions into the atmosphere by means of chromatographic sorption of inert radioactive gases and purification from radioactive iodine compounds at nuclear power plants.
They are designed to accommodate filters in ventilation systems at various industrial, medical facilities, and nuclear power plants (NPPs), including nuclear power plants (NPPs) and ships.
Housing for Du-350 aerosol filters
It is designed for installing aerosol filters and aerosol-iodine filters in ventilation, purification, and discharge systems with a cross-section diameter of 350 mm.
Designed for the installation of aerosol filters and aerosol-iodine filters in ventilation, purification, and discharge systems with a cross-section diameter of 300 mm. It is manufactured for both vertical and horizontal filter placement.
It is designed for installing aerosol filters and aerosol-iodine filters in ventilation systems of nuclear power plants, ships, and other vessels with nuclear reactors that have a cross-section diameter of 150 mm.
It is designed for installing aerosol filters (such as FAS-V-3500-IS filters) in ventilation, purification, and discharge systems, primarily at nuclear power plants, as well as at radiochemical and similar facilities.
High-efficiency air filtration units are special equipment designed for deep purification of air from fine particles, toxic substances, harmful impurities, and aerosols, including radioactive ones. They are intended for use at various industrial facilities, including nuclear power facilities. They are widely used in medicine, energy, electronics, food industry, and other fields where a highly clean environment is required.
UV-21000 Aerosol Filtration Unit
The installation is designed for use at industrial facilities, including nuclear power facilities.
Modification for the Shipbuilding Industry UVFPC-01
It is designed for local purification of polluted air from radioactive aerosols and radioactive iodine compounds in the area where nuclear submarines are being operated.
The installation is designed for use at industrial and civil facilities as a local filtering device for highly efficient purification of polluted air from various solid aerosols, including radioactive ones, with particle sizes ≤0.3 μm.
It is used to produce test aerosols with specified properties. The equipment is used to test the filtration quality of clean rooms (in accordance with VDI 2063 and EN 14644).
Aerosol Generator AF ATM 226
It is used to produce test polydisperse aerosols. It has a variable output of aerosol particles. The design ensures high stability in particle size and concentration.
Order according to individual technical requirements
You can order a filter, housing, and filtration system with the required parameters based on your technical specifications.
Order a filter
Delivery
We work with leading transport companies in Russia
Business Lines LLC
It provides road, container, air, and rail transportation of consolidated cargo in any direction across Russia and neighboring countries, as well as loading and unloading services and cargo packaging.
To the website
CDEK
CDEK is a major Russian courier delivery service that provides fast and reliable transportation of parcels and cargo throughout the country and abroad.
To the website
Your company
If you prefer to use the services of other transport companies, please fill out a pick-up request on your own. Our manager will provide you with all the necessary information about the cargo: the number of pieces, weight, dimensions, address, and pick-up time.